Premium Leather Wrist Cuffs - Americana Red Midnight Edt
- Unit price
- / per
We offer complimentary custom sizing. Please see here for measuring instructions.
Handcrafted in Australia
Premium Quality Leather
Discreet Worldwide Shipping
Over 2,600 Five Star Reviews
Adding product to your cart
- These cuffs are handcrafted from 3 layers of beautiful supple leather in a deep Americana Red colour. These Midnight Edition cuffs are appointed with all black hardware and wrapping strap including lockable buckles.
These cuffs are extremely high quality made to last.
Specifications:Sizing: 13-26CM (5” – 9.5”)Width of cuffs: 60mm (2.4”)Enclosure: Lockable bucklesThickness of leather: Multiple layers, the cuffs are approximately 4mm thick.Material: Premium nappa leather Our standard sizing will fit most people due to their designs and generous adjustability. However, if you require custom sizing we offer this at no extra cost. Simply enter your relevant measurements into the customisation field on purchase and we'll take care of the rest.
Please note, we don't require perfectly accurate measurements as we’ll craft your piece with room to adjust. This also allows you to wear it tighter or looser depending on your preference. If you do have any fit preferences just include these as well in your instructions.
If you have any questions at all regarding sizing or fit, please don't hesitate to reach out to us!
Please see below instructions for measurements for each type of product. If you don't have a flexible measuring tape you can use a string and then place this on a ruler to get the circumference.
Collars
-
Wrap the tape around your neck where the collar will sit.
-
Keep it level and snug without squeezing.
- For our martingale collars please just measure your neck circumference at the base and we will make it to the correct size. If you have a preference for tighter or looser fit please note this in the customisation section on purchase.
Wrist Cuffs
-
Measure around your wrist where the cuff will be worn.
-
Keep your hand relaxed and the tape comfortably snug.
Ankle Cuffs
-
Measure just above your ankle bone, where the cuff will sit.
-
Stand naturally, without flexing your foot.
Thigh Cuffs
-
Measure around the part of your thigh where the cuff will sit.
-
Keep your leg relaxed - don’t flex or tense the muscle.
Upper Body Harnesses
-
Bust/Chest: Measure around the fullest part of your chest.
-
Under bust: Measure around the area directly under your bust.
- Waist: Measure around your natural waist (narrowest part of your torso).
Lower Body Harnesses
-
Waist: Measure around your natural waist (narrowest part of your torso).
-
Hips: Measure around the fullest part of your hips/butt.
-
Thighs: Measure around the part of your thigh where the straps will sit. Keep your leg relaxed - don’t flex or tense the muscle.
-
Cleaning Your Leather Gear
Cleaning Your Leather Gear (Not including suede)
We recommend gentle cleaning of your gear after use to remove body oils and perspiration.
- Dip a microfiber cloth in warm water and a few drops of dish soap, and use the cloth to wipe your leather gear.
- Avoid firm rubbing as this may damage softer leathers.
- Use a damp microfiber cloth (no soap this time) to wipe down your item.
- Ensure you dry the leather fully with a clean and dry cloth.
- You may also like to use an appropriate leather cleaner and conditioner (such as those used for horse tack) every 6 or so months for maintenance.
- Never immerse your leather gear in water as this can alter the colour or shape and reduce its resilience.
Cleaning Your Suede Leather Gear
- Do not wet your suede as it will stain the leather.
- For light cleaning use a soft brush and brush in one direction.
- For a deeper clean we recommend a suede (or nubuck) specific cleaner.
Storing your leather gear
- Store your leather items in a natural fiber bag or a container with vents in a cool, dry space - away from humidity, heat, and direct sunlight to avoid any damage.
- Floggers should be stored by hanging in a cool, dry place to avoid crumpling of the tails.
- Do not store your leather items in plastic or sealed containers as leather is a porous material that needs to breathe in order to stay supple and prevent mould or other damage.
Hardware Care
Steel & Brass
- Gently clean with warm water, mild dish soap, and a soft cloth (a lint-free one). For buckles you may like to use a soft toothbrush to clean those hard to get to areas. Ensure you dry thoroughly with a soft cloth.
- If you prefer, you can invest in a stainless-steel cleaning formula to remove grime and prolong the sheen.
Plated Gold or Rose Gold
- Use a dry polishing cloth to remove grime and oils, ensuring the hardware holds onto its shine.
- If a more thorough clean if required you can also use mild dish soap and warm water. Remove any soapy residue with a damp cloth and dry the rose gold after, giving it a once over with the dry polishing cloth to keep it gleaming.
- Plated gold or rose gold can tarnish over time due to natural oils excreted by the skin, humidity, and skincare creams or perfumes. We recommend not using skincare products in the area prior to wearing any Rose Gold hardware items, and gently polishing after each use.
- Some people are more prone to plated metals tarnishing from skin contact - if you find this is the case we recommend an anti-oxidation protectant spray.
Avoiding oxidation
The natural process of oxidation occurs when metals are exposed to sunlight and air. Oxidation affects metals in different ways, e.g. when silver is exposed to lots of sunlight and air it may turn black over time, whereas gold may develop a dull, brown hue.
Oxidation can tarnish your hardware and leave it looking lacklustre. Good maintenance cleaning and proper storage will keep your metals shining as good as new. You may also like to use an anti-oxidation spray to protect your hardware.
If you do find your STEEL or BRASS hardware has tarnished there are commercially available cleaning products that will restore it to its original shine. Avoid harsh cleaners for ROSE GOLD or GOLD PLATED hardware as this will damage the plating.
If you have any issues with your leather items or hardware please get in contact with us!
We ship parcels to destinations all over the world. Please be assured our parcels are very discreetly packaged!
The best part is all orders over $80 (AUD – Australian Dollars) ships for free!*
*USA CUSTOMERS: Please note, unfortunately due to the tariffs, we are no longer able to absorb the shipping costs as we previously did in addition to tariff amount. Therefore we are not able to offer free shipping to the USA at this time. We have tried to keep the cost as low as possible for you however, and have implemented a flat fee (tiered depending on the size of your order) for shipping that includes an amount for the tariff. This means that your shipping cost (provided on checkout) covers all tariff fees and there is nothing more to pay when your parcel arrives.
We do everything we can to get our parcels shipped out as soon as possible with an average turn around of only 4-7 days for our leather items to be made to order before shipping.
AUSTRALIA
Regular services: 2-5 days to East Coast Destinations, 4-8 days to WA / NT / TAS.
Express services: 1-3 days to most destinations.
US / CANADA
Regular services: 2-3 weeks
Express Services: 1-2 weeks
EUROPE
Regular services: 2-3 weeks
Express Services: 1-2 weeks
ASIA
Regular services: 2-3 weeks
Express Services: 1-2 weeks
ALL OTHER DESTINATIONS
Regular services: 3-4 weeks
Express Services: 2-3 weeks
We want you to love your Mercy Industries piece as much as we loved making it. Because our gear is handcrafted to order with custom sizing options, our approach to returns is designed to be fair, transparent and respectful of both you and our craft.
Change of Mind
We will gladly accept the return of products* for either exchange or refund, no questions asked. Just contact us within 14 days of receiving your order and we will advise you of the next steps. Please note that for change of mind returns the product must be in original condition and packaging, and unworn.
*Please Note: Items made to custom sizing specifications are not eligible for change of mind returns or cancellations once production has commenced. This is because each custom sized piece is cut and crafted specifically to your measurements, using materials and time that cannot be recovered.
If you do have any issues with your custom sized item however please do get in contact with us and we will do our best to assist.
Order Changes or Cancellations
As we often start production on orders within 24 hours, if you have a change of mind or would like to cancel your order, please contact us as soon as possible.
Incorrect Size
If your item doesn’t fit, we’ll adjust or remake it free of charge. Just contact us within 14 days of receiving your order and we’ll walk you through the next steps. Please note that we offer free custom sizing on all our items, so if you are not sure if the standard sizing will fit, just include your relevant measurements in the customisation section on the product page and we will ensure that it is made to your size (with ample room for adjustment).
Faulty or Defective Items
In the rare event your item arrives damaged or faulty:
-
Email us at contact@mercyindustries.com within 14 days of delivery.
-
Include photos and a brief description of the issue.
-
We’ll replace, or refund the item where appropriate.
Manufacturing faults are fully covered - hardware failure, stitching flaws, or structural defects.
Damage from misuse, general wear and tear, or lack of care is not considered a fault. However if you do come across an issue with your gear please get in touch with us and we will do our best to assist.
Refunds
Refunds are issued to the original payment method once the item has been returned or otherwise approved.
Need Help?
We’re a small Australian business and take the utmost pride in our workmanship and customer service. If there’s something wrong or you’re just unsure please reach out to us. We will always do our best to take care of you and ensure you have an outstanding experience with Mercy Industries.
Email: contact@mercyindustries.com
Our postal address for returns is:
Sunrise Valley
PO BOX 3111
West Ipswich
QLD 4305
AUSTRALIA-
These cuffs are extremely high quality made to last.
Our standard sizing will fit most people due to their designs and generous adjustability. However, if you require custom sizing we offer this at no extra cost. Simply enter your relevant measurements into the customisation field on purchase and we'll take care of the rest.
Please note, we don't require perfectly accurate measurements as we’ll craft your piece with room to adjust. This also allows you to wear it tighter or looser depending on your preference. If you do have any fit preferences just include these as well in your instructions.
If you have any questions at all regarding sizing or fit, please don't hesitate to reach out to us!
Please see below instructions for measurements for each type of product. If you don't have a flexible measuring tape you can use a string and then place this on a ruler to get the circumference.
Collars
-
Wrap the tape around your neck where the collar will sit.
-
Keep it level and snug without squeezing.
- For our martingale collars please just measure your neck circumference at the base and we will make it to the correct size. If you have a preference for tighter or looser fit please note this in the customisation section on purchase.
Wrist Cuffs
-
Measure around your wrist where the cuff will be worn.
-
Keep your hand relaxed and the tape comfortably snug.
Ankle Cuffs
-
Measure just above your ankle bone, where the cuff will sit.
-
Stand naturally, without flexing your foot.
Thigh Cuffs
-
Measure around the part of your thigh where the cuff will sit.
-
Keep your leg relaxed - don’t flex or tense the muscle.
Upper Body Harnesses
-
Bust/Chest: Measure around the fullest part of your chest.
-
Under bust: Measure around the area directly under your bust.
- Waist: Measure around your natural waist (narrowest part of your torso).
Lower Body Harnesses
-
Waist: Measure around your natural waist (narrowest part of your torso).
-
Hips: Measure around the fullest part of your hips/butt.
-
Thighs: Measure around the part of your thigh where the straps will sit. Keep your leg relaxed - don’t flex or tense the muscle.
Cleaning Your Leather Gear
Cleaning Your Leather Gear (Not including suede)
We recommend gentle cleaning of your gear after use to remove body oils and perspiration.
- Dip a microfiber cloth in warm water and a few drops of dish soap, and use the cloth to wipe your leather gear.
- Avoid firm rubbing as this may damage softer leathers.
- Use a damp microfiber cloth (no soap this time) to wipe down your item.
- Ensure you dry the leather fully with a clean and dry cloth.
- You may also like to use an appropriate leather cleaner and conditioner (such as those used for horse tack) every 6 or so months for maintenance.
- Never immerse your leather gear in water as this can alter the colour or shape and reduce its resilience.
Cleaning Your Suede Leather Gear
- Do not wet your suede as it will stain the leather.
- For light cleaning use a soft brush and brush in one direction.
- For a deeper clean we recommend a suede (or nubuck) specific cleaner.
Storing your leather gear
- Store your leather items in a natural fiber bag or a container with vents in a cool, dry space - away from humidity, heat, and direct sunlight to avoid any damage.
- Floggers should be stored by hanging in a cool, dry place to avoid crumpling of the tails.
- Do not store your leather items in plastic or sealed containers as leather is a porous material that needs to breathe in order to stay supple and prevent mould or other damage.
Hardware Care
Steel & Brass
- Gently clean with warm water, mild dish soap, and a soft cloth (a lint-free one). For buckles you may like to use a soft toothbrush to clean those hard to get to areas. Ensure you dry thoroughly with a soft cloth.
- If you prefer, you can invest in a stainless-steel cleaning formula to remove grime and prolong the sheen.
Plated Gold or Rose Gold
- Use a dry polishing cloth to remove grime and oils, ensuring the hardware holds onto its shine.
- If a more thorough clean if required you can also use mild dish soap and warm water. Remove any soapy residue with a damp cloth and dry the rose gold after, giving it a once over with the dry polishing cloth to keep it gleaming.
- Plated gold or rose gold can tarnish over time due to natural oils excreted by the skin, humidity, and skincare creams or perfumes. We recommend not using skincare products in the area prior to wearing any Rose Gold hardware items, and gently polishing after each use.
- Some people are more prone to plated metals tarnishing from skin contact - if you find this is the case we recommend an anti-oxidation protectant spray.
Avoiding oxidation
The natural process of oxidation occurs when metals are exposed to sunlight and air. Oxidation affects metals in different ways, e.g. when silver is exposed to lots of sunlight and air it may turn black over time, whereas gold may develop a dull, brown hue.
Oxidation can tarnish your hardware and leave it looking lacklustre. Good maintenance cleaning and proper storage will keep your metals shining as good as new. You may also like to use an anti-oxidation spray to protect your hardware.
If you do find your STEEL or BRASS hardware has tarnished there are commercially available cleaning products that will restore it to its original shine. Avoid harsh cleaners for ROSE GOLD or GOLD PLATED hardware as this will damage the plating.
If you have any issues with your leather items or hardware please get in contact with us!
We ship parcels to destinations all over the world. Please be assured our parcels are very discreetly packaged!
The best part is all orders over $80 (AUD – Australian Dollars) ships for free!*
*USA CUSTOMERS: Please note, unfortunately due to the tariffs, we are no longer able to absorb the shipping costs as we previously did in addition to tariff amount. Therefore we are not able to offer free shipping to the USA at this time. We have tried to keep the cost as low as possible for you however, and have implemented a flat fee (tiered depending on the size of your order) for shipping that includes an amount for the tariff. This means that your shipping cost (provided on checkout) covers all tariff fees and there is nothing more to pay when your parcel arrives.
We do everything we can to get our parcels shipped out as soon as possible with an average turn around of only 4-7 days for our leather items to be made to order before shipping.
AUSTRALIA
Regular services: 2-5 days to East Coast Destinations, 4-8 days to WA / NT / TAS.
Express services: 1-3 days to most destinations.
US / CANADA
Regular services: 2-3 weeks
Express Services: 1-2 weeks
EUROPE
Regular services: 2-3 weeks
Express Services: 1-2 weeks
ASIA
Regular services: 2-3 weeks
Express Services: 1-2 weeks
ALL OTHER DESTINATIONS
Regular services: 3-4 weeks
Express Services: 2-3 weeks
We want you to love your Mercy Industries piece as much as we loved making it. Because our gear is handcrafted to order with custom sizing options, our approach to returns is designed to be fair, transparent and respectful of both you and our craft.
Change of Mind
We will gladly accept the return of products* for either exchange or refund, no questions asked. Just contact us within 14 days of receiving your order and we will advise you of the next steps. Please note that for change of mind returns the product must be in original condition and packaging, and unworn.
*Please Note: Items made to custom sizing specifications are not eligible for change of mind returns or cancellations once production has commenced. This is because each custom sized piece is cut and crafted specifically to your measurements, using materials and time that cannot be recovered.
If you do have any issues with your custom sized item however please do get in contact with us and we will do our best to assist.
Order Changes or Cancellations
As we often start production on orders within 24 hours, if you have a change of mind or would like to cancel your order, please contact us as soon as possible.
Incorrect Size
If your item doesn’t fit, we’ll adjust or remake it free of charge. Just contact us within 14 days of receiving your order and we’ll walk you through the next steps. Please note that we offer free custom sizing on all our items, so if you are not sure if the standard sizing will fit, just include your relevant measurements in the customisation section on the product page and we will ensure that it is made to your size (with ample room for adjustment).
Faulty or Defective Items
In the rare event your item arrives damaged or faulty:
-
Email us at contact@mercyindustries.com within 14 days of delivery.
-
Include photos and a brief description of the issue.
-
We’ll replace, or refund the item where appropriate.
Manufacturing faults are fully covered - hardware failure, stitching flaws, or structural defects.
Damage from misuse, general wear and tear, or lack of care is not considered a fault. However if you do come across an issue with your gear please get in touch with us and we will do our best to assist.
Refunds
Refunds are issued to the original payment method once the item has been returned or otherwise approved.
Need Help?
We’re a small Australian business and take the utmost pride in our workmanship and customer service. If there’s something wrong or you’re just unsure please reach out to us. We will always do our best to take care of you and ensure you have an outstanding experience with Mercy Industries.
Email: contact@mercyindustries.com
Our postal address for returns is:
Sunrise Valley
PO BOX 3111
West Ipswich
QLD 4305
AUSTRALIA